Flight Controllers

Sort By:  
Raceflight Millivolt Flight Controller is an incredibly advanced, compact, performance oriented solution for pilots looking for and incredible flight controller in an extremely small phsyical size.
$34.95
The RaceFlight RevoltOSD flight controller is the most advanced, performance driven, flight controller ever designed. The Revolt uses a powerful F405 MPU, accompanied with the High Speed Invensense 20602 gyro, allows it to take full advantage of RaceFlight Ones efficient code to run at 32KHz for the best Performance possible.
$44.95
The All in One Lumenier ALPHA Flight Controller (F4 FC, 4x 30A BLHeli_32 ESC, OSD, PDB, Curr).
$74.99
Amazing AIO F4 Flight controller, with 4000uf capacitance built in, no bulky caps needed!!
$99.00
The RaceFlight Revolt flight controller is the most advanced, performance driven, flight controller ever designed. The Revolt uses a powerful F405 MPU, accompanied with the High Speed Invensense 20602 gyro, allows it to take full advantage of RaceFlight Ones efficient code to run at 32KHz for the best Performance possible.
$34.95
The RaceFlight RevoltOSD flight controller is one of the most advanced, performance-driven, flights controller ever designed. The Revolt uses a powerful F405 MPU, accompanied by the High Speed Invensense 20602 gyro, allows it to take full advantage of RaceFlight Ones efficient code to run at 32KHz for the best Performance possible.
$47.95
Furious FPV Fortini F4 OSD - Seeing Is Believing.
$39.95
The Omnibus Fireworks flight controller uses the ICM20608 over SPI for the best possible flight performance. With onboard damping box, the ICM20608 runs perfectly under 32k Gyro loop. If you haven't already seen it, you should check out Josh's awesome video on different IMUs. Also onboard are a barometer and AB7456 OSD chip for the BetaFlight integrated OSD.
$49.99
The OmniNXT F7 is Airbot’s top of the range flight controller based on the Omnibus F7 v2. It uses the trusty MPU6000 Gyro with an additional ICM20608 on top. With the onboard damping box, the gyros run perfectly under 32k looptime. If you haven't already seen it, you should check out Josh's awesome video on different IMUs. The NXT also comes with 2 different BECs and 6 UARTs.
$59.99
RaceFlight Millivolt Flight Controller(New Version) (Milivolt FC)

Raceflight continues to push the limits within the FPV community not only with incredibly powerful flight controller software, but now is additionally offering hardware that matches the goals of their software; industry leading performance without compromises.

Raceflight Millivolt Flight Controller is an incredibly advanced, compact, performance oriented solution for pilots looking for and incredible flight controller in an extremely small phsyical size. Capable of running at 32KHz Gyro Sampling, PID Loop, & Motor Loop (thanks to a powerful F4 processor), Millivolt will perform like no other controller in it's class and size! Utilizing a F405 Processor, Invensense 20602 (Super Secret Gyro), Raceflight One software, Millivolt will provide incredibly crisp and smooth performance out of the box.

Thanks to Raceflight One, the Millivolt features extremely stable performance thanks to powerful filtering found only in Raceflight, ensuring that incredible performance is delivered due to strong vibration rejection. Filtering allows for the first flights to be incredibly smooth, but once tuned and actively racing or freestyling, even incredibly bent or broken props do not alter the Millivolts performance.

Features

  • 3.3V or 5.0V available onboard
  • LED Driver for WS2812b LEDs
  • Ingared LED Race Transponder support - Infared LED required & purchased separately
  • Futureproof - iPhone & Android configurator support coming
  • Highspeed 32KHz Gyro
  • Through hole solder pads
  • Supports FrSky, Spektrum, Futaba, JR, iBus, S.Bus
  • Integrated Buzzer support
  • Voltage & Current ADC Pins - Voltage/Current monitoring via telemetry
  • Full telemetry output support
  • ESC flashing & configuration built into configurator
  • 3.3V or 5V selectable output voltage
  • 2 serial UARTs
  • Bluetooth explandable
  • F4 Processor
  • 16mb onboard flash memory

Specifications

  • Processor: F4 F405 MPU 
  • Firmware: RaceFlight (BB) or RaceFlight One (Beta) 
  • Gyro: SSG (Super Secret Gyro) Invensense 20602 
  • Mounting Dimensions: 20x20mm 
  • Physical Dimensions: 26.75x26.45x5.75mm (without gummies) 
  • Weight: 3g

Includes

  • 1x RaceFlight Millivolt Flight Controller
  • 4x Mounting Grommets
Raceflight Millivolt Flight Controller is an incredibly advanced, compact, performance oriented solution for pilots looking for and incredible flight controller in an extremely small phsyical size.
$34.95
Revolt OSD (RevoltOSD)

RevoltOSD

Building on the success of the Revolt, we have created the next iteration in flight controllers.  Designed to add all the features customers have been asking for, as well as some new ideas.   Builds now take 1/10th the time, due to the easy connector system.  However, you still have the ability to direct solder, if you prefer.  Flight controller now accepts full LIPO voltage, with up to a 6s rating, with plenty of filtering to give you the highest performance.  Wiring kits will be available for all the most popular devices, so there is no need to solder anything, just plug and play.   There will be extra pre-pined kits that allow you to customize for main different situations.  We have even included an OSD and camera control on the latest Flight Controller.

The RaceFlight RevoltOSD flight controller is the most advanced, performance driven, flight controller ever designed. The RevoltOSD uses a powerful F405 MPU, accompanied with the High Speed Invensense  20602 gyro, allows it to take full advantage of RaceFlight Ones efficient code to run at 32KHz for the best Performance possible.

Performance

The RevoltOSD presents not only the BEST performance, but also the most STABLE performance due to the amazing vibration rejection technology implemented in RaceFlight. Our filters along with the integrated RaceFlight Gummies, allow your quad to stay in the air no matter what! Damaged propellers caused by that insane gate clip on turn 3? Not a problem. You can still finish the race! Endless days of tuning are now a thing of the past.  Our boards come preloaded with software and defaults that should fly amazing for 99% of people.

In addition to the vibration rejection technology, the SSG (Invensense 20602) gives you the highest speeds currently possible with the lowest noise floor and highest sensitivity. The Invensense 20602 gyro has never been used in any flight controller before (except the Revolt) and gives you the fastest response time possible as if the quad can read your mind.

Setup Simplicity

Setting up the RevoltOSD is easy.  The solder pin layout is easy to read with motor connections in each corner. Just solder the closest motors and the wizard handles the rest,  you can put the Revolt in upside down and backwards just solder to the closest motor pad and the RF1 wizards will handle the rest.  . The RevoltOSD also features DFU free updating and a self-healing and updating bootloader, just in case something does go wrong.

Zadig and other complicated driver configuration tools are a thing of the past with the RevoltOSD’s new driverless installation technology. Tired of messing around with Zadig or DFU to update your software? We were too, that’s why you no longer have to worry about messing around with them. The RevoltOSD also features DFU free updating and a self-healing and updating bootloader, just in case something does go wrong.

Features

  • Fast building using connector system
  • Full Lipo up to 6s rating
  • Advanced filtering
  • Plug and Play
  • Built in internal OSD
  • LED Driver for WS2812b programmable LED
  • SBUS Inversion
  • High Speed 32khz gyro, lowest noise floor and highest sensitivity gyro ever used
  • Through hole solder pads – forms an I-Beam when soldered for extra strength
  • FrSky Taranis, Spektrum, Futaba, JR, IBus, Sbus and other radio support
  • Integrated buzzer driver
  • Voltage and current ADC pins, for full voltage and current monitoring
  • Full telemetry output support
  • ESC flashing and configuration built into configurator
  • Most active software development
  • Selectable 3.3 voltage
  • 3 serial uarts
  • Bluetooth expandable
  • F4 processor
  • 16mb of flash memory
  • GPS expandable
  • Pins into RaceFlight Bolt 4in1 ESC
  • Dimensions: 36mm x 36mm
  • Mounting holes: 30.5mm squared to center of holes
  • Weight: 6 grams
  • Easily connectable to the RaceFlight Bolt with our special connector.

The RaceFlight Guarantee

Revolters will also get access to RaceFlight’s ticketed tech support which will include step-by-step help with installation, tuning, and anything else that may arise with your Revolt.

 Congratulations

You are now a RaceFlight Revolter! Welcome to the exclusive club </div>
						<div class= View Write Review

The RaceFlight RevoltOSD flight controller is the most advanced, performance driven, flight controller ever designed. The Revolt uses a powerful F405 MPU, accompanied with the High Speed Invensense 20602 gyro, allows it to take full advantage of RaceFlight Ones efficient code to run at 32KHz for the best Performance possible.
$44.95
Lumenier ALPHA AIO Flight Controller (F4 FC, 4x 30A BLHeli_32 ESC, OSD, PDB, Curr) (ALPHA AIO Flight Controller)

The Lumenier ALPHA AIO Flight Controller is a truly All-in-One FC that combines a F4 FC, 4x 30A BLHeli_32 bit ESCs, Betaflight OSD, PDB, 5v 3A BEC and Current Sensor all in 1 compact package and weighing only 16g! Like other AIO flight controllers, you’ll be able to tune your PID’s using your transmitter, and use the drag and drop OSD setup in the OSD tab of the BetaFlight Configurator. This ALPHA AIO Flight Controller integrates the latest in ESC technology with BLHeli_32 bit ESCs, while at the same time handing high current of 30A per motor constant. If you've been thinking about trying a AIO FC + ESC, then this is the one for you.

Specification

  • BLHELI_32 4in1 30A+F4+OSD
  • Con.current: 30A
  • Peak current(10s): 35A
  • SBEC: 3A/5V
  • Lipo: 2-4s
  • F4+OSD+BEC+CURRENT
  • Input: 2-4s lipo
  • Output voltage: 5V/2A
  • STM32F4 CPU
  • Black box
  • ICM-MPU6000 Accelerometers and Gyroscopes
  • MicroUSB socket
  • Weight: 16g
  • Size(PCB): 36*36mm

BetaFlight software target is VGOODHF4 for 3.1.7 or below. For BetaFlight 3.2 and higher use the LUXF4OSD

Includes

  • 1x 30A 4in1 ESC built-in F4 flight controller
  • 1x 16AWG Power Cable
  • 1x Plastic spacers (M3x 5mm and 3mm tall) and screws (M3x20)
The All in One Lumenier ALPHA Flight Controller (F4 FC, 4x 30A BLHeli_32 ESC, OSD, PDB, Curr).
$74.99
NOX V2.19 (NOX V2.19)

KNOWN to run 6S with no problems!!! Not covered under warranty if running 6S, so run at your own risk. 

Airbot is back at it again offering next-generation technologies in a single compact and reliable board. This time it comes in a 20x20mm hole pattern for your smaller micro 4" and super light 5" builds.

Features include:


Flight Controller

  • Betaflight OSD
  • STM32F411 MCU
  • MPU6000 Gyro - It's also replaceable
  • Barometer
  • 5V BEC with LC filter (500ma)
  • 4000uf capacitors onboard - No Need for bulky caps

4in1 ESC

  • BLHeli32 - The 32-bit architecture that we've come to expect
  • DSHOT 1200
  • 35A Per motor
  • Telemetry Output functionality
  • ESC upgradeable

 

Yes that's right, all of that installed in a single board with 48mmx39mm dimensions , 20x20mm mounting holes and weights around 20g!

The Nox 2.17 has been thoroughly tested and you can put your order in for one now. We cover the risk if you have any bugs or issues.

We will update the test progress in RCG thread: https://www.rcgroups.com/forums/showthread.php?2963607-What-is-this-at-airbot-com-NOX-TEST-VERSION/

Change Log:
V2.15 change log:
1. fixed restart issue
2. pre-flashed, no CLI needed
3. all orders shipped from DEC.04, will be v2.15

Amazing AIO F4 Flight controller, with 4000uf capacitance built in, no bulky caps needed!!
$99.00
RaceFlight Revolt V3 Flight Controller (Revolt V3)

The RaceFlight Revolt flight controller is the most advanced, performance driven, flight controller ever designed. The Revolt uses a powerful F405 MPU, accompanied with the High Speed Invensense 20602 gyro, allows it to take full advantage of RaceFlight Ones efficient code to run at 32KHz for the best Performance possible.

Performance

The Revolt presents not only the BEST performance, but also the most STABLE performance due to the amazing vibration rejection technology implemented in RaceFlight. Our filters along with the integrated RaceFlight Gummies, allow your quad to stay in the air no matter what! Damaged propellers caused by that insane gate clip on turn 3? Not a problem. You can still finish the race! Endless days of tuning are now a thing of the past. Our boards come preloaded with software and defaults that should fly amazing for 99% of people.

In addition to the vibration rejection technology, the SSG (Invensense 20602) gives you the highest speeds currently possible with the lowest noise floor and highest sensitivity. The Invensense 20602 gyro has never been used in any flight controller before (except the Revolt) and gives you the fastest response time possible as if the quad can read your mind.

Setup Simplicity

Setting up the Revolt is easy. The solder pin layout is easy to read with motor connections in each corner. Just solder the closest motors and the wizard handles the rest, you can put the Revolt in upside down and backwards just solder to the closest motor pad and the RF1 wizards will handle the rest. . The Millivolt also features DFU free updating and a self-healing and updating bootloader, just in case something does go wrong.

Zadig and other complicated driver configuration tools are a thing of the past with the Revolt’s new driverless installation technology. Tired of messing around with Zadig or DFU to update your software? We were too, that’s why you no longer have to worry about messing around with them. The Revolt also features DFU free updating and a self-healing and updating bootloader, just in case something does go wrong.

Features

  • LED Driver for WS2812b programmable LED
  • SBUS Inversion
  • High Speed 32khz gyro, lowest noise floor and highest sensitivity gyro ever used
  • Through hole solder pads – forms an I-Beam when soldered for extra strength
  • FrSky Taranis, Spektrum, Futaba, JR, IBus, Sbus and other radio support
  • Integrated buzzer driver
  • Voltage and current ADC pins, for full voltage and current monitoring
  • Full telemetry output support
  • ESC flashing and configuration built into configurator
  • Most active software development
  • Selectable 3.3 voltage
  • 3 serial uarts
  • Bluetooth expandable
  • F4 processor
  • 16mb of flash memory
  • GPS expandable
  • Pins into RaceFlight Bolt 4in1 ESC
  • Dimensions: 36mm x 36mm
  • Mounting holes: 30.5mm squared to center of holes
  • Weight: 6 grams
  • Easily connectable to the RaceFlight Bolt with our special connector

The RaceFlight Guarantee

Revolters will also get access to RaceFlight’s ticketed tech support which will include step-by-step help with installation, tuning, and anything else that may arise with your Revolt.

Includes

  • 1x RaceFlight Revolt V3
The RaceFlight Revolt flight controller is the most advanced, performance driven, flight controller ever designed. The Revolt uses a powerful F405 MPU, accompanied with the High Speed Invensense 20602 gyro, allows it to take full advantage of RaceFlight Ones efficient code to run at 32KHz for the best Performance possible.
$34.95
RaceFlight SKITZO RevoltOSD Flight Controller (RaceFlight SKITZO RevoltOSD)

Building on the success of the Revolt, RaceFlight have created the next iteration in flight controllers. Designed to add all the features customers have been asking for, as well as some new ideas. Builds now take 1/10th the time, due to the easy connector system. However, you still have the ability to direct solder, if you prefer. Flight controller now accepts full LiPo voltage, with up to a 6s rating, with plenty of filtering to give you the highest performance. Wiring kits will be available for all the most popular devices, so there is no need to solder anything, just plug and play. There will be extra pre-pined kits that allow you to customize for main different situations. We have even included an OSD and camera control on the latest Flight Controller.

The RaceFlight RevoltOSD flight controller is one of the most advanced, performance-driven, flight controllers ever designed. The RevoltOSD uses a powerful F405 MPU, accompanied by the High-Speed Invensense 20602 gyro, allowing it to take full advantage of RaceFlight One's efficient code to run at 32KHz for the best Performance possible.

The SKITZO special edition comes in black for a sleek look.

Pairs perfectly with the RaceFlight SKITZO Bolt32.

Performance

The RevoltOSD presents not only the BEST performance but also the most STABLE performance due to the amazing vibration rejection technology implemented in RaceFlight. Our filters along with the integrated RaceFlight Gummies, allow your quad to stay in the air no matter what! Damaged propellers caused by that insane gate clip on turn 3? Not a problem. You can still finish the race! Endless days of tuning are now a thing of the past. Our boards come preloaded with software and defaults that should fly amazingly for 99% of people.

In addition to the vibration rejection technology, the SSG (Invensense 20602) gives you the highest speeds currently possible with the lowest noise floor and highest sensitivity. The Invensense 20602 gyro has never been used in any flight controller before (except the Revolt) and gives you the fastest response time possible as if the quad can read your mind.

Setup Simplicity

Setting up the RevoltOSD is easy. The solder pin layout is easy to read with motor connections in each corner. Just solder the closest motors and the wizard handles the rest, you can put the Revolt in upside down and backward just solder to the closest motor pad and the RF1 wizards will handle the rest. The RevoltOSD also features DFU free updating and a self-healing and updating bootloader, just in case something does go wrong.

Zadig and other complicated driver configuration tools are a thing of the past with the RevoltOSD’s new driverless installation technology. Tired of messing around with Zadig or DFU to update your software? We were too, that’s why you no longer have to worry about messing around with them. The RevoltOSD also features DFU free updating and a self-healing and updating bootloader, just in case something does go wrong.

Features

  • Fast building using connector system
  • Full Lipo up to 6s rating
  • Advanced filtering
  • Plug and Play
  • Built-in internal OSD
  • LED Driver for WS2812b programmable LED
  • SBUS Inversion
  • High-Speed 32khz gyro, lowest noise floor, and highest sensitivity gyro ever used
  • Through-hole solder pads – forms an I-Beam when soldered for extra strength
  • FrSky Taranis, Spektrum, Futaba, JR, IBus, Sbus and other radio support
  • Integrated buzzer driver
  • Voltage and current ADC pins, for full voltage and current monitoring
  • Full telemetry output support
  • ESC flashing and configuration built into the configurator
  • Most active software development
  • Selectable 3.3 voltage
  • 3 serial UARTs
  • Bluetooth expandable
  • F4 processor
  • 16mb of flash memory
  • GPS expandable
  • Pins into RaceFlight Bolt 4in1 ESC
  • Dimensions: 36mm x 36mm
  • Mounting holes: 30.5mm squared to center of holes
  • Weight: 6 grams
  • Easily connectable to the RaceFlight Bolt with our special connector.

The RaceFlight Guarantee

Revolters will also get access to RaceFlight’s ticketed tech support which will include step-by-step help with installation, tuning, and anything else that may arise with your Revolt.

Includes

  • 1x RaceFlight SKITZO RevoltOSD
The RaceFlight RevoltOSD flight controller is one of the most advanced, performance-driven, flights controller ever designed. The Revolt uses a powerful F405 MPU, accompanied by the High Speed Invensense 20602 gyro, allows it to take full advantage of RaceFlight Ones efficient code to run at 32KHz for the best Performance possible.
$47.95
FuriousFPV FORTINI F4 OSD 32Khz Flight Controller V2 (FPV-FORTOSD)

Building upon the powerful Fortini F4, Furious FPV introduces the all new Fortini F4 OSD, introducing new capability & functionality to simplify setup & redefine your next FPV experience. Hold on - it's about to get really good.

Utilizing the cutting edge & feature packed Fortini F4 platform, we have introduced BetaFlight OSD, with the full ability to alter every setting you need direct via your transmitter. No need for your PC - just a few simple stick movements, and you're there - simple and straightforward, just the way it should be.

From PID's, camera settings, VTx power and beyond, the Fortini F4 OSD builds upon the previous F4 with powerful and easy to use operating capability without the need of a PC. Need more? We added a built in LC filter for even greater video image, allowing you to push the ragged edge with your next FPV ride.

Designed to be nothing but the very best, the Fortini OSD utilizes high performance, low noise 32kHz Invensense 20602 gyros, (5) UARTS, built in Input / Output Inrush Voltage Protection, and the capability to allow S.PORT direct connection with the receiver without any aspect of receiver modification. This massive feature dense packaging offers everything you could ever want from the most sophisticated flight controller available today.

Feature rich and ultra powerful, the Fortini is the full up package, breaking new ground in true FC brilliance. Toss compromise out the window and open your FPV world to the most functional and feature packed FC you have ever seen before.

Features:

- Ultra Simplified OSD Interface w/ No PC Necessary

- High Performance, Low Noise, Ultra Sensitive 32kHz Invensense 20602 Gyro

- Five UARTS for Simultaneous Connections of SBUS, S.Port,  MSP Receiver, and USB

- UARTS Connection Options for TBS Smart Audio or Immersion RC Tramp

- Integrated Soft Mount Silicone Damping for Maximum FC Functionality

- Inrush Voltage Protection Input & Output via Transient Voltage Suppressor

- High Quality 5V 2A BEC w/ 2S - 6S Voltage Input Range

- Built In Driver Inverter for SBUS and Smart Port Connection

- Separate Power Supply for Gyro w/ LDO for Low Noise & High Accuracy

- 3.3V - 5V Selectable BEC Output for Rx

- Fully Capable to Power Rx via USB Port

- Clean and Easy to Connect 4-in-1 ESC

- Clean and easy to connect VTX have telemetry (Stealth race, Tramp, Unify)

- Additional Serial RX 5 & Optional UART6 (Tx6 with/without inversion)*

BetaFlight OSD - Setup Simplified.

Ditch the PC and enter the world of simplicity & ease. Setup brilliance awaits you with built in BetaFlight OSD, offering full parameter adjustment when it comes to all your flight settings. From camera, PID's VTx power and beyond, you are seconds away from perfection - no strings attached.

Invensense 32kHZ Gyro - Nothing but the Best.

Fly it like it's on rails. With cutting edge gyro functionality, the 32kHz Invensense 20602 gyro is the best of the best, offering epic flight characteristics every time you take to the skies. Utilizing low noise & high sensitivity, this gyro makes every flight simply unforgettable.

Simultaneous Connection Functionality - Keep It Social.

With the ability to integrate so many systems into (1) flight controller, the Fortini OSD pushes the realms of connectivity with (5) UARTS, allowing SBUS, S.PORT, MSP Receiver, USB and either TBS Smart Audio or Immersion RC Tramp functionality. Simply put, this bad boy is feature packed in every possible way.

Bad to the Bone BEC - Function Meets Demand.

Massively flexible with high power output, the 2A 5V BEC offers a wide 2S to 6S input range, with the ability to select 3.3V to 5V receiver power & the ability to power the Rx via USB. With this level of flexibility, it's simply plug & play - Furious FPV has taken the hard work out of the loop.

Input & Output Inrush Voltage Protection - Safety is Key.

Protecting against extreme voltage spikes, the Inrush Input & Output Voltage protection keeps everything safe, making sure transient voltage spikes do no damage.

Camera OSD control/LED Strip functions

BetaFlight OSD and beyond, the FORTINI F4 OSD can control the camera OSD settings as well as LED strip functions. This unleash full customization for your build both performance and appearance. 

* The CNC Aluminium Spacers and Silicone Dampers come in random colors: red, blue, purple and black and they are also available for purchase separately.

*From 20/01/2018, FORTOSD Rev.2 includes Additional Serial RX 5 & Optional UART6 (Tx6 with/without inversion)

User manual: FORTINI F4 OSD

* Firmware update via Betaflight

 

Instruction video :

* How to set Camera OSD and BetaFlight OSD via TX

Resource  CAMERA_CONTROL none

Resource LED_STRIP 1 B07

Save

* Guideline: Change Camera control to LED Strip on Fortini F4 OSD

How to set Crossfire micro on the Fortini F4 OSD by: Sniperx -NL

 

 

Download firmware R-SXR receiver : Click here

FuriousFPV FORTINI F4 OSD Betaflight PID and RSSI Setting Review by Danny Chan

 

Check out Danny Chan channels: Click here

Champion Min Chan Kim with FORTINI OSD at IDSC 2017

Choice of Champion - Min Chan Kim

 

Furious FPV Fortini F4 OSD - Seeing Is Believing.
$39.95
OMNIBUS Fireworks v2 (OMNIBUS Fireworks v2)

The Omnibus Fireworks flight controller uses the ICM20608 over SPI for the best possible flight performance. With onboard damping box, the ICM20608 runs perfectly under 32k Gyro loop. If you haven't already seen it, you should check out Josh's awesome video on different IMUs. Also onboard are a barometer and AB7456 OSD chip for the BetaFlight integrated OSD.

Omnibus Fireworks supports 3-6s LIPO direct input, build in hall Current Sensor and Power Filter too.

The on Board PDB is tweaked by using 12-Layer PCB design. There is only 0.2-0.5 mohm internal resistance from input to each output pads

Modifications on v2:

  • Tantalum Capacitors can be added to the board (not included)
  • Solder pads added for SmartAudio and Camera Control (next to Video pads)
  • The orientation of IMU FPC optimized
  • Gyro ribbon cable redesigned to fit without extending outside the board
  • Added an 8v BEC and LC Filter for the camera and VTX power
  • This board now has 5 UART ports

Features:

  • STM32 F405 MCU, Runs Betaflight firmware(supported from v3.2)
  • ICM20608 Over SPI Bus in damping box. (optional MPU6000)
  • 30.5x30.5mm Mounting holes
  • Supports Lipo direct plugin (3-6S)
  • Supports 5V 1A BEC output (Buck)
  • Supports 8V 1A BEC with LC filter output for the camera and VTX(Buck)
  • STM32 controls OSD chip over SPI in DMA mode (Betaflight OSD)
  • Built-in hall Current Sensor
  • Built-in Professional Level PDB
  • More caps to reduce power noise.

Package incl.:

  • FC/PDB board x 1
The Omnibus Fireworks flight controller uses the ICM20608 over SPI for the best possible flight performance. With onboard damping box, the ICM20608 runs perfectly under 32k Gyro loop. If you haven't already seen it, you should check out Josh's awesome video on different IMUs. Also onboard are a barometer and AB7456 OSD chip for the BetaFlight integrated OSD.
$49.99
OMNINXT F7 (OMNINXT F7)

The OmniNXT F7 is Airbot’s top of the range flight controller based on the Omnibus F7 v2. It uses the trusty MPU6000 Gyro with an additional ICM20608 on top. With the onboard damping box, the gyros run perfectly under 32k looptime. If you haven't already seen it, you should check out Josh's awesome video on different IMUs. The NXT also comes with 2 different BECs and 6 UARTs.

OmniNXT F7 supports 3-6s LIPO direct input, built-in hall Current Sensor and Power Filter.

This FC is designed to be able to pair with one of Airbot's 4in1 ESCs to form a powerful combo, and also has pins for individual ESCs too. 

Features:

  • F7 MCU processors
  • Two gyros onboard: MPU6000 for sampling up to 8khz and ICM20608 for sampling up to 32khz
  • 30.5x30.5mm Mounting holes
  • Supports 3-6S Lipo
  • Built-in 5V 1A BEC output (Buck)
  • Built-in 8V 1A BEC with LC filter output for the camera and VTX (Buck)
  • STM32 controls OSD chip over SPI in DMA mode (Betaflight OSD)
  • Built-in hall Current Sensor
  • More caps to reduce power noise
  • Port for easy connection to Airbot 4-in-1 esc (SH1.0 8P)
  • Solder pads added for SmartAudio and Camera Control

Package incl.:

  • OmniNXT F7 Flight Controller x 1

The OmniNXT F7 is Airbot’s top of the range flight controller based on the Omnibus F7 v2. It uses the trusty MPU6000 Gyro with an additional ICM20608 on top. With the onboard damping box, the gyros run perfectly under 32k looptime. If you haven't already seen it, you should check out Josh's awesome video on different IMUs. The NXT also comes with 2 different BECs and 6 UARTs.
$59.99
MiliVolt OSD (MiliVolt OSD)

MillivoltOSD

The RaceFlight MillivoltOSD Micro flight controller is the most advanced, performance driven, flight controller ever designed. The MillivoltOSD uses a powerful F405 MPU, accompanied with the High Speed Invensense  20602 gyro, allows it to take full advantage of RaceFlight One’s efficient code to run at 32KHz for the best Performance possible.

Performance

The MillivoltOSD presents not only the BEST performance, but also the most STABLE performance due to the amazing vibration rejection technology implemented in RaceFlight. Our filters along with the integrated RaceFlight Gummies, allow your quad to stay in the air no matter what! Damaged propellers caused by that insane gate clip on turn 3? Not a problem. You can still finish the race! Endless days of tuning are now a thing of the past.  Our boards come preloaded with software and defaults that should fly amazing for 99% of people.

In addition to the vibration rejection technology, the SSG (Invensense 20602) gives you the highest speeds currently possible with the lowest noise floor and highest sensitivity. The Invensense 20602 gyro has never been used in any flight controller before (except the Revolt and RevoltOSD) and gives you the fastest response time possible as if the quad can read your mind.

Software

Our flight controller comes pre-loaded with RaceFlight One. The configurator and latest stable build can be downloaded from https://raceflight.com/download. No drivers simply plug in the MillivoltOSD and it automatically connects to the Configurator
This is truly amazing software, which flies so well you can completely eliminate prop wash. Setup is a breeze as well, just run a couple wizards and you will get right up into the air.

Setup Simplicity

Setting up the MillivoltOSD is easy.  The solder pin layout is easy to read with motor connections in each corner. Just solder the closest motors and the wizard handles the rest,  you can put the MillivoltOSD in upside down and backwards just solder to the closest motor pad and the RF1 wizards will handle the rest.  . The MillivoltOSD also features DFU free updating and a self-healing and updating bootloader, just in case something does go wrong.

Features

  • weight: 3.3 grams
  • Integrated Vibration Dampening RaceFlight Gummies
  • Inverter for Taranis and Futaba radios
  • 3.3v or 5.0v for Spektrum, Taranis, etc
  • LED Driver for WS2812b programmable LED
  • High Speed 32khz gyro, lowest noise floor and highest sensitivity gyro ever used
  • Through hole solder pads – forms an I-Beam when soldered for extra strength
  • FrSky Taranis, Spektrum, Futaba, JR, IBus, Sbus and other radio support
  • Integrated buzzer driver
  • Voltage and current ADC pins, for full voltage and current monitoring
  • Full telemetry output support
  • ESC flashing and configuration built into configurator
  • Most active software development
  • 3.3v and 5v voltage outputs
  • 2 serial uarts
  • Bluetooth expandable
  • F4 processor
  • 16mb of flash memory
  • GPS expandable
  • Pins into The RaceFlight Spark Micro 4in1 ESC
  • Dimensions: 25mm x 25mm
  • Mounting holes: 20mm squared to center of holes

The RaceFlight Guarantee

In addition to all the other amazing things the MillivoltOSD presents, Millivolters get access to RaceFlight’s ticketed tech support which will include step-by-step help with installation, and anything else that may arise with your MillivoltOSD. We have by far the best support system and community in the industry.  Join our slack and talk to other users, or contact support directly.

$44.95
Per Page      1 - 10 of 10
  • 1