5"

Sort By:  
A set of 2 HQProp(2CW+2CCW) polycarbonate propellers.
$3.60
A set of 2 HQProp(2CW+2CCW) polycarbonate propellers.
$3.60
The HQProp DP 5x4.5x3V1S Propeller. The new airfoil design from HQProp. Comes in a set of four propellers.
$3.60
The Lumenier QAV-SKITZO Dark Matter FPV Freestyle Quadcopter. The QAV-SKITZO is built for freestyle FPV and features a ultra-durable, symmetrical carbon fiber body.
$55.00
Our newest in-house frame is an ultralight. This frame is a lighter evolution of the original Pro 5, and we couldn't be more excited.
$54.95
Our first, in-house built, 5 inch stretched X racing frame. This lightweight durable 5 inch racer has our speciality low positioned VTX antenna mount and short standoffs for a sleek and clean build. Recently upgraded to 5mm arms.
$59.95
The next step in the Torque Pro 5 evolution.
$59.95
HQProp DP 5x4.3x3 PC V1S Light Green Propeller - 3 Blade (2CW+2CCW/Bag) (HQProp DP 5x4.3x3 PC V1S)

A set of 2 HQ propellers, 3 blade style with a 5mm center hub. A good prop for small planes and multi-rotors. (multi-rotor applications would need both CW and CCW).

Includes

  • 2x 5x4.3x3 CW VS1 propellers
  • 2x 5x4.3x3 CCW VS1 propellers
A set of 2 HQProp(2CW+2CCW) polycarbonate propellers.
$3.60
HQProp DP 5x4.3x3 PC V1S Black Propeller - 3 Blade (2CW+2CCW/Bag) (HQProp DP 5x4.3x3 PC V1S Black)

A set of 2 HQ propellers, 3 blade style with a 5mm center hub. A good prop for small planes and multi-rotors. (multi-rotor applications would need both CW and CCW).

Includes

  • 2x 5x4.3x3 CW VS1 propellers
  • 2x 5x4.3x3 CCW VS1 propellers
A set of 2 HQProp(2CW+2CCW) polycarbonate propellers.
$3.60
HQProp DP 5x4.5x3V1S PC - 3 Blades (Set of 4 - Light Blue) (HQProp DP 5x4.5x3V1S PC )

HQprop Co is dedicated to providing high-quality RC model UAV propellers that suit everything from Mini Racing / Acro Quad-Copters to larger Multi-Rotors and Aerial Photography Drones.

HQ designers have collaborated with both the frame manufacturers and notable pilots to develop a vast range of higher performing, more efficient, and more durable props for FPV racing. 

The V1S series is their latest addition to their line of affordable and well-performing props. 

Specifications

  • Type: Multi-Rotor
  • Material: Polycarbonate
  • Length: 5"
  • Pitch: 4.5"
  • Blades: 3
  • Weight: 4.2g ea.
  • Center hole diameter: 5mm

Includes

  • 2x 5x4.5x3 CW V1S propellers
  • 2x 5x4.5x3 CCW V1S propellers
The HQProp DP 5x4.5x3V1S Propeller. The new airfoil design from HQProp. Comes in a set of four propellers.
$3.60
QAV-SKITZO Dark Matter FPV Freestyle Quadcopter (QAV Skitzo Dark Matter FPV Freestyle Quadcopter)

The Lumenier QAV-SKITZO Dark Matter FPV Freestyle quadcopter is a symmetrical X, ultra-durable, finely tuned airframe designed for high performance FPV Freestyle flying. The QAV-SKITZO was created in collaboration with and named after the flow master himself SKITZO FPV. This freestyle airframe has been designed from the ground up to withstand the rigors of freestyle flying pilots like Skitzo put their airframes through. 

The QAV-SKITZO features premium Lumenier carbon fiber with a beautifully finished chamfered edge, giving the quad a sleek look while also improving the durability by removing hard edges. Each plate is sealed with a layer of clear coat paint further strengthening each piece and giving it an awesome finished look. No rough edges or carbon dust to worry about, and no sanding required.

The airframe features removable 4mm carbon fiber arms and 3mm thick top and bottom plates. The arms are sandwiched between the bottom plate and 2mm battery plate giving you an incredible 9mm thick of carbon fiber at the center of the body. Each arm is secured in place with just 2 screws and a threaded aluminum bar on top. This allows you to remove 1 arm by simply taking out 2 screws with just 1 tool.

Not only does this airframe fly amazingly, but it looks great too with Skitzo's original astro-photography featured in the custom sticker sheets. Each QAV-SKITZO kit comes with a complete airframe sticker set showing off some stellar space photography shot by Jonathon himself. Pair these graphic frame stickers with the included custom purple spacers for a truly cosmic look!

Lumenier QAV-SKITZO

Each 4mm arm and plates are CNC milled out of a solid sheet of premium Lumenier carbon fiber. The outer weave of the carbon fiber runs 100% down each arm of the QAV-SKITZO (0/90 weave), maximizing the strength of the carbon and arms. The center layers are offset at 45 degrees providing even and balanced strength throughout the entire plate.

The top plate includes two accessory antenna plates, allowing for multiple cable ties to lock down your antenna in place, or vertically mount your VTX and SMA connector. No more damaging the SMA connection on your VTX. Alternatively you can use the vertical antenna plate, enabling a vertical VTX install on the tail. The top plate also has a cutout allowing access to your VTX button and LED displays for easy channel adjustment. The 3mm top plate has multiple notches along the side making it a versatile mounting plate for a variety of HD camera mounts.

The airframe comes with high quality aluminum hardware. All screws are premium, black oxide steel. The spacers have a textured grip surface treatment, which facilitates holding of the spacers during assembly and servicing of the airframe. The spacers are 35mm tall giving you plenty of room for all the electronics to be protected inside.

Included with the QAV-SKITZO kit is the popular Lumenier 4Power power distribution board which can be fitted with an optional Pololu voltage drop-down circuit (to 12v or 5v), a XT60 pig-tail. Like the QAV-X and QAV-R, the QAV-SKITZO kit enables mounting of small FPV cameras such as the Lumenier CM-650 in a fully encased assembly which protects the FPV camera during crashes and enables pointing the FPV camera at a wide variety of viewing angles.

Features

  • Full 3K Carbon Fiber airframe with removable 4mm arms.
  • Ultra durable 3mm top and bottom plates
  • Custom Skitzo decal sticker sheet
  • Compact size for 5" propellers, 214mm motor to motor.
  • Black Oxide steel screws
  • Easy grip purple anodized spacers
  • "Bumpers" on the end of the arms to protect the motor during a crash
  • Included Lumenier 4Power power distribution board and XT-60 Pig-Tail to power ESCs and FPV flight electronics. The PDB can optionally be outfitted with a Pololu 12v or 5v voltage step-down (Pololu board not included).
  • Designed around popular 26mm sized cams in cases such as the Lumenier CM-650 or HS1177.
  • Lightweight and rigid

Weight

  • Airframe: 96g (airframe + hardware), 100g (with sticker decal).

Includes

  • 1x QAV-SKITZO Dark Matter FPV Freestyle Quadcopter
    • 4x 4mm carbon fiber arms
    • 3mm carbon fiber top plate
    • 3mm carbon fiber base plate
    • 2mm carbon fiber bottom plate
    • 1.5mm carbon fiber antenna plate
    • 1.5mm G10 vertical antenna mount
    • 1.5mm carbon fiber side rack plate
    • 2x 2mm carbon fiber camera sidewall plates
  • 1x Skitzo Dark Matter Airframe Sticker Sheet
  • 1x Set of black steel screws and aluminum hardware including knurled spacers, cable ties
  • 2x No-slip silicone battery pad
  • 1x Lumenier 4Power Power distribution board
  • 1x set 6mm black polyamide spacers / screws for flight controller
  • 1x XT-60 Pig-Tail
  • 1x Neoprene foam tape
  • 1x Lumenier small lipo strap
The Lumenier QAV-SKITZO Dark Matter FPV Freestyle Quadcopter. The QAV-SKITZO is built for freestyle FPV and features a ultra-durable, symmetrical carbon fiber body.
$55.00
Diatone TyrantS 215 Frame (Tyrant S)
These are the newly released Diatone TyrantS series kits. This kit also includes the built in PDB with electric noise caps on each ESC. The H frame measures about 215 mm from the front left to rear right motor. The frame is constructed very very strong 4mm carbon fiber with a resin over that to increase the strength of the quad. The unibody design is very stron, and yet to replace one! The power distribution board has a 5 and 12V regulator to power the camera and video TX.
$45.00
Torque Pro 5 Lite (Pro 5 Lite)
The Torque Pro 5 Lite is our newest design. This frame was designed to be an ultra-lightweight powerhouse. It tips the scales at just 50g and can be fully assembled at 190g. Our tester is running a 1000mAh battery and has an AUW/w battery of just 325g! The Pro 5 Lite has an identical stretch to its bigger brother, the Pro 5; with that being said, you can expect the same stability with faster response and improved agility. As with any ultralight the Pro 5 Lite takes a slight hit in durability when compared to the Pro 5, but as long as it is not over burdened with excess weight this frame can take a beating. This is our chief reason for building it with a 20x20 stack and 4mm arms. Our tester used 2204 motors and had the straight line speed of the heavier Pro 5 with 2206 motors but had a level of agility and efficiency that was incomparable. 
The intention of the Pro 5 Lite is to be able to be ran hard by a pro level racer without falling out of the sky on a track that is too fast. With the right build, this frame can be ran balls to the wall on the fastest tracks and still easily make the 2 minute mark without having to HV charge for extra mAh. Our tester ran a 1000mAh LiPo and was still able to complete 2 full laps at speed after running a 2 minute main.

Features
   
  • 50g weight
  • 20x20 stack
  • 4mm arms
  • Top mount Battery
  • Camera angle 20° to 90°
Recommendations

  • Motor weight of 24g or less
  • Lightweight antenna
  • 850-1300 mAh LiPo
  • Recommended motor size is 2204


Our newest in-house frame is an ultralight. This frame is a lighter evolution of the original Pro 5, and we couldn't be more excited.
$54.95
Torque Pro 5 (Pro 5)

Description

The Torque Pro 5 is our revolutionary racing frame. The Pro 5 is a lightweight racing frame that is capable of all the camera angle you will ever need and has a built in VTx antenna mount with a windowed bay to mount your VTx inside of. This frame was inspired by and built for racers. We designed the frame to be lightweight and durable while also having a safe place to mount the VTx antenna.

 

Specifications


  • Lightweight 65g with all hardware on board (Ti Screws and 4mm arms)
  • Stretched X racing frame
  • Designed with top mount batteries in mind
  • Can be bottom mounted with the ability to easily replace the battery Strap.
  • Rear VTx antenna Mount
  • VTx can be mounted inside the frame and still accessed through lower windows
  • Camera has high angle capability >75°
  • Durable frame with 4mm arms
  • VTx bay allows for a spacious build even when using 20mm standoffs



Build Video
Our first, in-house built, 5 inch stretched X racing frame. This lightweight durable 5 inch racer has our speciality low positioned VTX antenna mount and short standoffs for a sleek and clean build. Recently upgraded to 5mm arms.
$59.95
Torque EVO (EVO)

Description

The Torque EVO is the latest edition to our revolutionary racing frame lineup. The EVO is a lightweight racing frame that is capable of all the camera angle you will ever need and has a built in SMA antenna mount. This frame was inspired by and built for racers. We designed the frame to be lightweight and durable while also having a safe place to mount the VTx antenna. Mount requires 90° UFL. This frame was designed as an evolution of the Pro 5 Lite, with advent of 6s we found that the Lite needed a little more strength to cope with the new weights, so we beefed it and created the EVO 

 

Specifications


  • Lightweight 64g with all hardware on board 
  • Stretched X racing frame
  • Designed with top mount batteries in mind
  • Can be bottom mounted with the ability to easily replace the battery Strap.
  • Rear VTx antenna Mount
  • VTx can be mounted inside the frame and still accessed through lower windows
  • Camera has high angle capability >75°
  • Durable frame with 5mm arms that touch for extra support
The next step in the Torque Pro 5 evolution.
$59.95
Per Page      1 - 8 of 8
  • 1